Thuren Fabrication | 1998.5-2013 Dodge Ram 2500 / 1998.5-2012 3500 XHD Sway Bar Links | 0-4 Inch Lift
Thuren XHD Swaybar Links are the strongest, most versatile swaybar links available to fit the OEM front swaybar.
These swaybar links allow you to retain the OEM swaybar, instead of our lighter rate Active Rate Sway Bar, when your truck is outfitted with a higher center of gravity like a slide in camper, heavy roof rack, heavy roof top tent, etc.
IMPORTANT NOTE: It's rare, but we have seen some of the 2010+ OEM Sway Bars that are a bit wider than normal, where the clevis slips over the bar. If you have a 2010+ truck please verify that the tip of your swaybar is no wider than 1.67".
- Same proven orbital JKS poly inner bushings used on our Active Rate Sway Bar.
- Fully grease-able
- 3/16" steel welded super stout clevis adapter.
- 17-4 stainless steel crush sleeves and 1998.5-2013 adapter washers.
- Zinc and Black Phosphate corrosion resistant hardware.
- Does not fit the 1994 to early 1998 "Cobra style" axle mounts.
Thuren XHD Swaybar Links are the strongest, most versatile swaybar links available to fit the OEM front swaybar.
These swaybar links allow you to retain the OEM swaybar, instead of our lighter rate Active Rate Sway Bar, when your truck is outfitted with a higher center of gravity like a slide in camper, heavy roof rack, heavy roof top tent, etc.
IMPORTANT NOTE: It's rare, but we have seen some of the 2010+ OEM Sway Bars that are a bit wider than normal, where the clevis slips over the bar. If you have a 2010+ truck please verify that the tip of your swaybar is no wider than 1.67".
- Same proven orbital JKS poly inner bushings used on our Active Rate Sway Bar.
- Fully grease-able
- 3/16" steel welded super stout clevis adapter.
- 17-4 stainless steel crush sleeves and 1998.5-2013 adapter washers.
- Zinc and Black Phosphate corrosion resistant hardware.
- Does not fit the 1994 to early 1998 "Cobra style" axle mounts.
Description
Thuren XHD Swaybar Links are the strongest, most versatile swaybar links available to fit the OEM front swaybar.
These swaybar links allow you to retain the OEM swaybar, instead of our lighter rate Active Rate Sway Bar, when your truck is outfitted with a higher center of gravity like a slide in camper, heavy roof rack, heavy roof top tent, etc.
IMPORTANT NOTE: It's rare, but we have seen some of the 2010+ OEM Sway Bars that are a bit wider than normal, where the clevis slips over the bar. If you have a 2010+ truck please verify that the tip of your swaybar is no wider than 1.67".
- Same proven orbital JKS poly inner bushings used on our Active Rate Sway Bar.
- Fully grease-able
- 3/16" steel welded super stout clevis adapter.
- 17-4 stainless steel crush sleeves and 1998.5-2013 adapter washers.
- Zinc and Black Phosphate corrosion resistant hardware.
- Does not fit the 1994 to early 1998 "Cobra style" axle mounts.
